• 3.3V, 5V, ±12V and 24V DC outputs
• 28VDC, 115VAC( Single and 3 Phase) Input
• Output power up to 500W
• 6U & 3U models in 4HP & 8HP case widths
• Myriad of Options available
• Mil-Std-461 Filter (Optional)
• Mil-Std-704 and 1399 Transients (Optional)
• Mil-Std-810 Severe Environments

AC Input Voltage Ranges
Contact factory for special needs.

115VAC, Single Phase, 50/60Hz, 400Hz
115VAC L-N/200VAC L-L , 3 Phase Wye, 50/60/400Hz
115VAC L-L, 3 Phase Delta, 50/60Hz

DC Input Voltage Ranges
Contact factory for special needs.

18-36VDC, 36-72VDC, 115VDC, 155VDC, 270VDC

Output Voltage(s)

Any voltage, 3.3V, 5V, ±12V, ±15V, 24V, 28V

Output Power – typical
Contact factory for special needs.

Up to 500W (AC input) or up to 600W (DC input)

Options
Contact factory for special needs.

Mil-Std-461 EMI Filter, On/Off Control, Thermal Shutdown, BIT/Fault Summary, Inrush Control, Hold-up Time, Mil-Std-704 & 1399 Transient Protection, Panel LED display(s), Redundant Operation, Low Noise Output Filters

Case Sizes – typical  
Contact factory for special needs.

Range from 0.78”H x 6.58”D x 4.45”L  to 1.58”H  x 6.58”D  x 9.18”L” with wide variety of styles & mounting available

I/O Options – typical

Mil grade type (std), Power D-Sub, Euro-DIN type

Operating Environments

Mil-Std-810F ( See Data Sheet )

Operating Temperature

-40C to +85C, baseplate (Conduction Cooled)
-55C to +85C (Optional)